Leave Your Message
  • sns02
  • linkedin (2)
  • sns041
  • whatsapp (2)
From One Fixed Key to Solid State Side Keys: Why Piezo Haptics Matter
Blog

From One Fixed Key to Solid State Side Keys: Why Piezo Haptics Matter

2026-09-30

1.Introduction
2.How Current Flagship Side Keys Work
3.The Trade Off of Removing the Physical Key
4.Industry Rumors and the Piezo Ceramic Direction
5.Bestarsensor: Engineering Support for Next Generation Solid State Haptics
6.Conclusion

Introduction
Phone makers have tried to remove the Home button for years. An early idea was a fixed surface with a small vibration. The user pressed it and felt a "click". It was not a real button, but it felt like one.
Today the talk is bigger. The industry now looks at the whole side of the phone, including the power key, the volume keys, the shortcut key and the camera key. Many designers want to turn all of them into solid state keys with no moving parts.
This fits a wider trend. Phones are getting more sealed and more uniform, with fewer holes and fewer gaps. A flat side with no visible keys is the next step for flagship phones.
This raises a simple question. If the real button goes away, what makes the press feel real? The answer is the touch feedback part inside the phone.

How Current Flagship Side Keys Work
Some flagship phones already ship with a new kind of side key. The camera key and the pressure side key are two examples. They look simple from outside, but inside they use three layers working together.
The first layer is pressure sensing. It reads how hard the finger presses, so the phone can tell a light touch from a firm press.
The second layer is capacitive touch. It reads where the finger is and how it moves. It can catch a tap or a slide along the side.
The third layer is a separate vibration motor. Its job is to give the finger a reply. When the user presses, the motor vibrates, and the user feels a click.
These designs share one feature. The key does not move in any way you can see. The "press down" feeling is not real travel. The feedback part creates it. If the feedback is weak, the key feels dead. If the feedback is sharp and clear, the key feels like a real button.

The Trade Off of Removing the Physical Key
There are good reasons to remove the real key.
Touch screens have limits. They can fail with gloves on, with wet fingers, with a thick case, or in very cold weather. A pressure sensor does not care about most of these problems. It reads force, not skin contact. So a solid state key can still work when a touch screen struggles.
The design also has a clear cost. A real key has a bump. You can find it with your finger in a pocket or a bag. You can press it without looking at the phone. Engineers call this blind operation.
A flat side gives the finger nothing to find. The user loses the shape guide. The only thing left is the feedback after the press.
That puts a lot of weight on haptics. The feedback must be clear. It must be strong enough to notice and sharp enough to feel like a click. It must also stay in one small spot, so the user knows which key was pressed. On a flat surface, the user needs to be sure. If the feedback is vague, people press again and again. That is a poor experience.

Industry Rumors and the Piezo Ceramic Direction
One report says a top phone brand has finished function tests on a solid state key design. The plan is to replace the power key, the volume keys, the shortcut key and the camera key with solid state keys. Each key would give local vibration feedback.
The same report says later versions may use piezoelectric ceramic parts. These parts would give fine feedback at the exact key position.
This direction makes sense. Piezo ceramic has several strengths for this job.
·It reacts very fast. The click arrives at the moment of the press.
·It is very thin. Side space in a phone is small, and a thin part is easier to fit.
·It can be placed with precision. The vibration stays near the key, not across the whole phone.
A normal motor shakes a large mass. The whole phone body tends to buzz. That is fine for a call alert, but it is not good for a small and exact key click. Piezo ceramic can give a short and clean pulse in one place. That is what a solid state key needs.

Bestarsensor: Engineering Support for Next Generation Solid State Haptics
Bestarsensor works in the piezo and haptics field. The company has spent many years on piezo ceramic material, layered part design and HD haptic drive methods. These are the three areas that matter most for solid state keys.
Material comes first. Good ceramic gives stable and repeatable output. A key is pressed thousands of times, so the feel must stay the same on day one and on day one thousand.
Structure comes second. A layered design lets a thin part give strong movement. This helps in the narrow side frame of a phone, where every fraction of a millimeter counts.
At the same time, this approach helps balance haptic output strength with integration requirements. This understanding of multilayer structures, material consistency, and miniaturized manufacturing goes well beyond the development of a single device.
According to publicly available information, Bestarsensor, together with BESTAR, Nanjing University of Aeronautics and Astronautics, and Jiangsu University of Technology, served as key participating organizations in the project titled “Key Technologies and Applications of Stacked, Low-Temperature Co-Fired, High-Sensitivity Piezoelectric Ceramic Sensors.” The project was nominated for the Jiangsu Provincial Science and Technology Award.
The technologies involved in the project—including stacked structures, low-temperature co-firing, and high-sensitivity piezoelectric devices—share strong technical relevance with the requirements of solid-state haptic actuators for multilayer construction, miniaturization, high consistency, and stable output. For space-constrained applications such as smartphone side frames, long-term expertise in piezoelectric ceramic materials and multilayer device structures enables engineering teams to consider thickness, output performance, structural stability, and manufacturing consistency together from the early design stage, rather than simply increasing device size to achieve stronger haptic feedback.
Drive comes third. The same part can give different feelings, depending on the signal. Bestarsensor works on drive methods that produce a sharp step response and a range of touch effects across different frequencies. A short, crisp press can feel different from a soft, round one. Phone brands can tune the key to match their own style.
Together, these strengths answer the main problem of solid state keys. The user needs to feel sure that the press was accepted. Bestarsensor piezo haptic parts are built to give that clear confirmation on a flat surface.
Bestarsensor also supports the engineering side. Phone hardware teams face tight stack limits on the side of the body. There is little room and many parts compete for it. Bestarsensor engineers work with customers on part size, mounting method and drive setup. The goal is a key that feels natural and does not stand out as a design problem. Custom parts are available for teams that need a special shape or a special feel.

Conclusion
The phone side is changing. The industry is moving from one fixed key to a full set of solid state side keys. The design is cleaner and more sealed. It also works better in wet, cold or gloved use.
The price is the loss of the real button. Without a bump to find, the feedback has to do all the work. Haptics is no longer a small extra feature. It decides whether the key feels good or feels dead.
Piezo ceramic is a strong candidate for this task. It is fast, thin and precise. As more phones adopt it, good haptic feedback will become a main mark of a premium device.
Are you planning a new solid state key, a smart surface or a premium touch device? Please contact the Bestarsensor technical team. We can share piezo haptic solutions and support your sample testing.

Latest News